Bandsaw Parts, Saw Parts, Band saw Parts, Blade Guides, Saw Guides, Carbide Blade Guides, Hem Guides, Hem Saw Parts, Hem Parts, Hem Saws, Hydmech Parts, Hydmech Saws, Hydmech Guides, Hydmech Saw Parts,
Hydmech Bandsaws, Hydmech Band Saw, Amada Parts, Amada Guides, Amada Saw Parts, Amada Saws, Amada Bandsaw Parts, Amada Band Saw Parts, Amada Blade Brush, Amada Blade Guides, Amada Carbide Guides, Amada Belts, Bandsaw Blade Guides, Band Saw Blade Guides, Behringer Saw, Behringer Saw Parts, Behringer Parts, Behringer Blade Guides, Behringer Saw Guides, DoAll Saws, DoAll Saw Parts, DoAll Parts, DoAll Blade Guides,, DoAll Bandsaw Parts, DoAll Band Saw Parts, Kasto Guides, Kasto Parts, Kasto Saws, Kasto Saw Parts, Kasto Blade Guides, Kasto Bandsaws, Kasto Bandsaw Parts, Kasto Band Saw Parts,
Daito Parts, Daito Saws, Daito Saw Parts, Daito Bandsaws, Daito Band Saw Parts, Marvel Saws, Marvel Parts, Marvel Saw Parts, Marvel Bandsaw Parts, Marvel Machine Parts, Marvel Bandsaw, Marvel Band Saw, Marvel Blade Guides, Marvel Carbide Guides, Phoenix Parts, Phoenix Saws, Phoenix Bandsaws, Phoenix Saw Parts, Phoenix Bandsaw Parts, Spartan Saws, Spartan Saw Parts, Spartan Blade Guides, Spartan Saws, Spartan Bandsaw Parts, Wells Saw, Wellsaw Parts, Wells Parts, Blade Guides, Carbide Blade Guides, Bandsaw Guides, Saw Parts, Bandsaw Parts, Band Saw Parts, Hem, Hydmech, Amada, Behringer, Daito, DoAll, Kasto, Marvel, Phoenix, Spartan, Wellsaw, Vise Racks, Saw parts, Band Saw Parts, Blade Guides, Saw Guides, Bandsaw Repair Parts, Machine Repair, Saw Maintenance. SHARC Industries LLC, Saw Parts.
Proudly Made
In the U.S.A.
All Blade Guides
SHARC Vise Components
for Amada® HA400 & HA/HFA400W
Saws
Cost # 400PWL
$131.64 CAD
plus shipping and handling for
Vise Pawl as Shown.
For 400 Band Saws
using Rack & Pawl Vises. Pawls shipped with bushing installed.
Replaces part #'s,
1230011a & 10321802
SHARC Pawls for 400's are machined from 4140 Annealed Steel for a much greater life span over OEM. They are approximately 8 Rockwell softer than our racks to aid in extended rack life.
Cut down on your maintenance costs with SHARC Racks. Replacing the brittle, factory cast iron racks with our pre-hardened 4140 units will make tooth breakage a thing of the past.
Cost # 400VRK
$381.23 CAD
plus shipping and handling for
Vise Rack as Shown.
For 400 Band Saws
using Rack & Pawl Vises. Racks drilled for front or rear use.
Replaces part #'s,
1230013 & 10321925
SHARC # 400VRK
SHARC # 400PWL
Cost # 400-VCC
$284.69 CAD plus shipping and handling for one vise Cylinder as shown. Fits all 400's using rack and pawl vises.
Cylinder ID is Nickel Chrome Coated and the OD is coated with Solvent Restistant Epoxy to match your saw.
Replaces Part #: 1230481a
Vise Clamp Cylinder
Vise Clamp Piston
Cost # 400VCP
$416.38 plus shipping and handling for one vise Piston as shown. Fits all 400's using rack and pawl vises.
Piston is machined of 4140 then Nickel Chrome Coated to resist wear. We have also strengthened the rod end to help alleviate breakage.
Replaces Part #: 1230482a
Alternate View
Vise Clamp Small Spring
Cost # 400VCSS
- 20 CAD plus shipping and handling for one vise Small Spring as shown, fits all 400's using rack and pawl vises.
Replaces Part #: 1230484
Vise Clamp Large Spring
Cost # 400VCLS
$66.44 CAD plus shipping and handling for one vise Large Spring as shown, fits all 400's using rack and pawl vises.
Replaces Part #: 1230483
