SHARC Vise Components
for Amada® 250 & 250W Saws
Proudly Made
In the U.S.A.
All Blade Guides
Cut down on your maintenance costs with SHARC Racks. Replacing the brittle factory cast iron racks with our pre-hardened 4140 units will make tooth breakage a thing of the past.
SHARC Industries Vise Racks are machined from pre-hardened 4140 steel to greatly increase the life of the rack.
SHARC # 250SCVR
Cost # 250SCVR
$286.88 CAD
plus shipping and handling for one Standard Clamp Vise Rack (15 tooth) for Older 250's using a round Quick approach bar in which the front half of the front vise has not been cut down.
Multiple racks show for example only. Racks are sold individually.
Racks are drilled to work on the front or rear vise.
Standard Clamping Racks
SHARC Industries Vise Racks are machined from pre-hardened 4140 steel to greatly increase the life of the rack.
SHARC # 250ZCVR
Cost # 250ZCVR
$286.88 CAD
plus shipping and handling for one Zero Clamp Vise Rack (16 tooth) for Newer 250's using a flat quick approach bar or for Older 250's using a round quick approach bar in which the fron vise has been cut down.
Multiple racks show for example only. Racks are sold individually.
Racks are drilled to fit on the front or rear vise.
Zero Clamp Racks
Cost # 250PWL
$95.63 CAD
plus shipping and handling for one vise pawl as shown.
Vise Pawl
Cost # 250WSP
$109.25 CAD
plus shipping and handling for all three work support plates as shown..
Work Support Plates
Cost # 250VRK
$28.75 CAD
plus shipping and handling for vise cylinder rebuild kit as shown. 2 cylinder o-rings, 2 piston o-rings and 2 bushings.
Vise Cylinder Kit
Cut down on your maintenance costs with SHARC Pawls. Replacing the quick wearing factory cast iron pawls with our annealed 4140 units will make frequent pawl replacement a thing of the past. While harder than OEM, they are softer than our racks to aid in increased rack life.
Cost # 250WSP
$172.13 CAD
plus shipping and handling for one vise Cylinder as shown. Fits all 250's using rack and pawl vises.
Cylinder ID is Nickel Chrome Coated and the OD is coated with Solvent Restistant Epoxy to match your saw.
Replaces Part #: 0602157A
Vise Clamp Cylinder
Vise Clamp Piston
Cost # 250VCP
$210.38 CAD
plus shipping and handling for one vise Piston as shown. Fits all 250's using rack and pawl vises.
Piston is machined of 4140 then Nickel Chrome Coated to resist wear. We have also strengthened the rod end to help alleviate breakage.
Replaces Part #: 1023C
Cost # 250VCS
$82.88 CAD
plus shipping and handling for one vise Spring as shown. Fits all 250's using rack and pawl vises.
Replaces Part #: 1105094A
Vise Clamp Spring
